Jap sunstrip
You will receive a 12inch x 56 inch sheet of black vinyl which you will need to cut and apply at the correct desired height (We sell squeegees to make the application process much easier)
Text Dimensions are:
Length: 38 Inches
Height: 6 Inches
If you require a different colour text or sunstrip please put this in your order notes OR contact us at [email protected] and we can do this for you
Application advice:
Please give yourself plenty of time to do this and be patient with it. don't try apply 10 minutes before work or 5minutes before your due to leave for a show or your gonna have a bad time.
Step 1: Clean the windscreen with a clean microfibre cloth and rubbing alcohol or water, so that the surface is free of dust, dirt, and grime. Do not use any generic glass cleaner as these can leave residue and cause the sun strip to peel and bubble. Make sure to dry the surface before you move onto step 2.
Step 2: Measure up your sun strip to the windscreen making sure it is level using a tape measure and masking tape to mark both sides where you would like to place your sun strip. You will receive a larger than required sunstrip so you may fit to your desired level.
Step 3: Peel off the paper backing and place the vinyl on the windscreen making sure both ends line up with your marking points, this is better done at a 90 degree angle and using a squeegee slowly removing the backing with one hand whilst using the squeegee with the other to place to sun strip down and minimise air bubbles.
Step 5: Squeegee out all the air/ water bubbles from under the vinyl ensuring it is perfectly flat. Cut the excess vinyl off around the edges using a sharp craft knife.
Step 6: Follow the above process to apply the text part of your sunstrip., making sure you again take your time and measure twice apply once!